A useful procurement comparison must separate plate geometry, fixation mechanics, surgical approach, instrument compatibility, regulatory status, and total operating cost. By the end, buyers can build a tender matrix that tests whether each system fits the fracture patterns treated at their hospital and can be supported reliably in Mexico City.
Key takeaways
- Match the construct to fracture pattern and surgical exposure.
- Test screw trajectories, locking engagement, and articular clearance.
- Price the complete instrument set, not only the implant.
- Ask for Mexican authorization, lot traceability, and supplier accountability.
Compare the construct before comparing the catalogue
Choose the architecture from the fracture and exposure, not from plate shape. A locking distal humerus plate comparison in mexico city should separate extra-articular metaphyseal, lateral-column, low transcondylar, and complex intra-articular fractures involving the capitellum, trochlea, or both columns.
| Option | Best fit | Approach and limitation |
|---|---|---|
| Single lateral or dorsolateral plate | Extra-articular metaphyseal or selected lateral-column fractures | Lateral or posterolateral exposure; may lack purchase for small medial or articular fragments |
| Lateral-support design | Lateral-column and low transcondylar fractures needing added distal capture | Lateral or posterolateral exposure; assess its actual screw spread, not its label |
| LCP-style combination-hole plate | Fractures needing fixed-angle locking plus compression or lag fixation | Verify conventional cortical-screw compression holes and locking trajectories |
| Medial-plus-lateral, parallel, or orthogonal bi-columnar construct | Low transcondylar and complex fractures involving the capitellum, trochlea, or both columns | Medial, lateral, posterolateral, or olecranon-osteotomy exposure; preserves the olecranon fossa only if positioned and contoured correctly |
Record the intended approach, distal fragment size, fracture extension, bone quality, reduction strategy, screw trajectories, and surgeon familiarity. Parallel and orthogonal dual plating both have clinical and biomechanical support; neither is universally superior.
In this distal humerus implant comparison, separate medial, lateral, and posterolateral paths must avoid the ulnar nerve and joint surface while capturing the capitellum and trochlea. Confirm that distal screws can support small articular fragments without entering the joint, rather than ranking constructs by hole count alone.
Test what the holes and screws actually do
A conventional locking plate provides angular stability: the screw head locks into the threaded plate hole, creating a fixed-angle construct. Tightening that screw does not compress the fracture. An LCP-style combination hole adds a conventional compression portion that accepts a cortical screw, so one plate can provide locking fixation and axial compression.
A lateral-support plate deserves separate scrutiny. Its label proves nothing about performance; assess its added distal fixation, screw trajectories, and purchase in the capitellum and trochlea. In a distal humerus implant comparison, confirm whether variable-angle locking is available, the permitted angulation range, and whether fixation uses threaded heads, a locking cap, or another mechanism.
Request these system details before approval:
- Screw diameters, lengths, thread profiles, head designs, insertion torque, drill-guide compatibility, taps, depth gauges, and screwdriver specifications.
- Compatibility of locking, non-locking, and lag screws with the same plate, with every approved combination identified in the surgical technique.
- Whether the advertised hole count means threaded holes, combination holes, or total holes.
- The number of usable holes after contouring, fracture placement, and safe trajectory limits.
- Distal screw spread, including whether screws can intersect or support the opposite column without entering the joint.
| Option | What it provides | Procurement test |
|---|---|---|
| Conventional locking | Fixed-angle stability | Confirm threaded head-to-hole engagement |
| LCP combination hole | Locking or cortical compression | Verify both portions accept approved screws |
| Lateral-support plate | Additional distal fixation | Review trajectories, not the name alone |
Choose length, contour, and fit from the fracture—not the hole count
Select plate dimensions from fracture extension, required screw purchase, bone quality, and permitted exposure—not from hole count. A longer plate is not automatically stronger: excessive length can increase dissection, while insufficient working length leaves too few screws beyond the fracture.
| Fit variable | What to verify | Why it matters |
|---|---|---|
| Plate length | Proximal extension, screw count on each side, and approach exposure | Prevents inadequate purchase or unnecessary dissection |
| Contour and width | Side, column shape, distal footprint, bend options, and thickness | Determines seating around the capitellum, trochlea, and olecranon fossa |
| Distal trajectory | Joint-surface clearance and purchase in the opposite column | A visually strong plate is unusable if screws enter the joint or miss the articular block |
Request a dimensioned drawing and current implant catalogue sheet showing overall length, hole spacing, thickness, width, bend options, distal footprint, and intended side. Before ordering inventory, compare radiographs with transparent overlays or sample implants around the capitellum, trochlea, olecranon fossa, and medial or lateral columns.
Confirm whether the plate can be contoured and whether bending damages threaded locking holes or changes approved screw trajectories. Use the manufacturer’s guides to check distal screws against the joint surface and opposite column.
For a distal humerus implant comparison, request system-level evidence rather than treating thickness or a static bending figure as clinical proof. ASTM F382 measures metallic bone-plate bending strength and stiffness; it does not predict pull-out, cyclic fatigue, notch effects, malreduction, or nonunion.
Evaluate ASTM F543 screw data separately for torsion, insertion and removal torque, and axial pullout.
Make the instrument set and clinical risk part of the price
A low implant price is irrelevant if the case cannot proceed. Specify the complete operating system, not just plates and screws, and price every reusable instrument, replacement, and reprocessing requirement.
- Dedicated drill guides matched to each exact plate reference
- Depth gauges, taps, screwdrivers, targeting guides, and reduction tools
- Compatible trays with defined contents and replenishment quantities
- Cleaning, disinfection, inspection, sterilization, and reprocessing instructions for reusable instruments
- Written confirmation that guides, screws, and drivers are interchangeable only where the surgical technique permits
- Replacement instruments, repair service, and delivery times
- A current technique guide identifying approved screw combinations and trajectories
Request clinical follow-up and reoperation data, not only plate-breakage tests. Require outcomes for nonunion, loss of fixation, screw loosening or joint penetration, infection, ulnar neuropathy, and elbow stiffness. Ask how the system supports reduction, distal screw purchase, soft-tissue protection, and plate positioning; locking does not correct malreduction or remove biological risk.
Build the tender table before comparing prices:
| Field | Record |
|---|---|
| Plate | Side, length, material, hole count and type |
| Screws | Diameters, lengths, locking-angle range, compression and lag-screw options |
| Supply | Sterile or non-sterile presentation, shelf life, lot traceability |
| Service | Lead time to Mexico City, consignment terms, replacement policy |
| Ownership | Instrument availability and reprocessing cost |
Include those costs in total cost of ownership. An incomplete or non-interchangeable set can delay surgery and erase the apparent implant saving.
Verify Mexican authorization, traceability, and supplier accountability
A local sales address does not prove Mexican manufacture or authorization. Identify the legal manufacturer, Mexican importer or distributor, and actual manufacturing site, then require the same evidence from every bidder, including a distal humerus plate manufacturer in Mexico City, a locking humerus plate supplier in Mexico, and an orthopedic plate supplier in Mexico City.
Use one document-control checklist:
- Match the quotation, label, technical file, and COFEPRIS sanitary-registration record for product name, catalogue or reference number, model, dimensions, intended use, sterilization status, and every screw and instrument reference.
- Verify the COFEPRIS registration status, product classification, registration holder, importer, and registered manufacturing site. Reject a file that relies on CE marking or FDA clearance without Mexican authorization.
- Check the ISO 13485 certificate’s issuing body, expiry date, scope, covered device family, and listed manufacturing locations. Under NOM-241-SSA1-2021, audit complaint handling, change control, lot traceability, and records for this implant family.
- Under NOM-240-SSA1-2012, document who receives adverse-event and complaint reports, how field safety notices are issued, and how lots, screws, instruments, and recalls are tracked.
- Confirm the locking mechanism, screw diameters and lengths, variable-angle range if offered, insertion torque, drill-guide compatibility, and approved locking and non-locking combinations.
Include Komal Health Care Pvt Ltd only after its quoted plates, screws, instruments, registrations, quality documents, and delivery terms pass this matrix; location or catalogue claims alone do not establish supplier accountability.
Related products
 | Orthopedic Implants Locking Distal Humerus Plate , DorsoLateral ₹4200 We Are Manufacturer Locking Distal Humerus Plate , DorsoLateral . Sizes is done From 3 Hole To 14 Hole , Difference of 1 hole in Left & Right Sides . View product → |
 | Orthopedic Implants Locking Distal Humrus Plate . DorsoLateral With lateral Support ₹4200 We Are Manufacturer Of Locking distal Humrus Plate , DorsoLateral With lateral Support . Size Is From 3 Hole To 14 Holes & 1 Hole Difference . View product → |
Frequently asked questions
How should hospitals compare locking distal humerus plates?
Compare the construct required for the fracture and exposure before comparing catalogue features. Separate extra-articular metaphyseal, lateral-column, low transcondylar, and complex intra-articular patterns.
What should procurement teams test in the holes and screws?
Check locking engagement, screw trajectory, available lengths, angular control, and clearance from the capitellum, trochlea, and joint surface.
How should hospitals choose plate length and contour?
Choose length, contour, and fit from the fracture, reduction strategy, bone quality, and exposure rather than from hole count alone.
What supplier documents should Mexican hospitals request?
Request evidence of Mexican authorization, lot and batch traceability, implant and instrument identification, sterilization information where applicable, and a clear process for complaints and recalls.
Related product
 | Orthopedic Implants LCP Extra Articular Distal Humerus Plate ₹4200 We Are Manufacturer Of LCP Extra Articular Distal Humerus Plate . Size Is from 4 Hole To 14 Holes , Difference of 1 hole . View product → |
